> ## Documentation Index
> Fetch the complete documentation index at: https://docs.ccew.com.au/llms.txt
> Use this file to discover all available pages before exploring further.

# Test report

> Record the results of mandatory safety tests for the CCEW form and ensure compliance with NSW regulations

This page explains how to record the results of mandatory safety tests in the CCEW form and ensure compliance with NSW regulations. Accurate testing and reporting are critical for ensuring the safety and compliance of your work.

## Test date and timing

The test date is mandatory and must reflect when safety tests were actually performed:

<Steps>
  <Step title="Select test date">
    Use the calendar picker or quick buttons ("Yesterday", "Today") to set the test date.
  </Step>

  <Step title="Timing considerations">
    All tests should be completed before certifying the installation to ensure accurate reporting.

    <Tip>
      Plan testing as the final step before energisation to capture the installation's true condition.
    </Tip>
  </Step>
</Steps>

## Mandatory safety tests

All applicable tests must be completed and documented. Use "Check All" to select all tests, or choose individual tests as required:

### Electrical safety tests

<CardGroup cols={1}>
  <Card title="Earthing system integrity" icon="shield-check">
    Verifies main earthing conductor continuity and connections. Essential for
    safety device operation during electrical faults.
  </Card>

  <Card title="Residual current device operational" icon="zap">
    Confirms RCDs and safety switches trip within required timeframes. Critical
    for life-saving protection.
  </Card>
</CardGroup>

### Installation verification tests

<CardGroup cols={1}>
  <Card title="Insulation resistance (MΩ)" icon="activity">
    Measures conductor insulation quality. Minimum 1 MΩ required to prevent
    current leakage and electrical shock hazards.
  </Card>

  <Card title="Visual check suitability of installation" icon="eye">
    Comprehensive visual inspection confirming correct equipment installation,
    environmental compliance, AS/NZS 3000 Wiring Rules compliance, and no
    visible damage or defects.
  </Card>

  <Card title="Polarity verification" icon="shuffle">
    Ensures correct active, neutral, and earth connections throughout the
    installation. Prevents dangerous cross-connections.
  </Card>
</CardGroup>

### Specialised system tests

<CardGroup cols={1}>
  <Card title="Stand-alone system compliance" icon="globe">
    Verifies off-grid or isolated power systems comply with AS4509 standards for
    safety and performance requirements.
  </Card>

  <Card title="Connection integrity" icon="link">
    Verifies secure terminations in switchboards and equipment to prevent fire
    hazards from loose connections.
  </Card>

  <Card title="Fault loop impedance" icon="zap-off">
    Measures fault current path impedance to confirm protective device
    effectiveness. Required when necessary to ensure adequate fault current for
    timely protection operation.
  </Card>
</CardGroup>

<Info>
  All tests must be performed according to AS/NZS 3000 and relevant Australian
  Standards using calibrated test equipment.
</Info>