> ## Documentation Index
> Fetch the complete documentation index at: https://docs.ccew.com.au/llms.txt
> Use this file to discover all available pages before exploring further.

# Equipment

> Document the electrical equipment installed and work performed in the CCEW form

This section documents the specific electrical equipment installed and work performed. Accurate work details are essential for compliance, safety verification, and future maintenance records.

## Equipment installation tracking

For each equipment type, check the installation box to indicate work was performed. This reveals additional fields for detailed specifications.

<CardGroup cols={2}>
  <Card title="Required information" icon="asterisk">
    When equipment is marked as installed, provide **Rating** and **Number
    Installed** for compliance tracking.
  </Card>

  <Card title="Additional details" icon="info">
    Use **Particulars** field for specific equipment details, models, or special
    conditions.
  </Card>
</CardGroup>

## Equipment types

<CardGroup cols={1}>
  <Card title="Switchboard" icon="server">
    Main distribution boards, sub-boards, and meter panels. Include total amp
    rating, number of ways, and specify type (e.g., "TPN 250A Main Board",
    "Single Phase Sub-Board").
  </Card>

  <Card title="Circuits" icon="git-branch">
    New circuit installations and modifications. Document circuit protection
    ratings, types, and note special circuits (RCD protected, RCBO, etc.).
  </Card>

  <Card title="Lighting systems" icon="lightbulb">
    All fixed lighting installations including LED downlights, fluorescent
    fittings, and exterior lighting. Include wattage and control methods
    (switches, dimmers, sensors).
  </Card>

  <Card title="Power outlets" icon="plug">
    General purpose outlets and dedicated circuits including standard GPOs, 15A
    outlets, and three-phase outlets. Note special requirements (weather
    protection, RCD protection).
  </Card>

  <Card title="Fixed appliances" icon="aperture">
    Hardwired electrical equipment such as hot water systems, air conditioning,
    and pool equipment. Include power ratings and connection types.
  </Card>

  <Card title="Generation equipment" icon="battery-charging">
    Solar PV, wind, and micro-hydro systems. Include inverter ratings, AC output
    capacity, and specify grid connection or off-grid configuration.
  </Card>

  <Card title="Energy storage" icon="battery-full">
    Battery systems and backup power installations. Include battery capacity
    (kWh), inverter ratings, and integration with existing or new generation
    systems.
  </Card>
</CardGroup>

## Equipment specification details

For each installed equipment type, provide:

### Rating information

* **Electrical rating:** Voltage, current, and power specifications
* **Protection rating:** Circuit breaker or fuse sizes
* **Environmental rating:** IP ratings for outdoor installations

### Installation quantities

* **Number Installed:** Total units or points installed

### Particulars and specifications

* **Manufacturer and model:** For critical equipment identification
* **Special features:** Smart controls, energy efficiency ratings
* **Environmental conditions:** Outdoor, wet area, hazardous location specifications

<Tip>
  Include model numbers and specific ratings for major equipment like
  switchboards, inverters, and large appliances to assist with future
  maintenance and compliance verification.
</Tip>